Why the development of network media is becoming better and better? While the paper media is going from bad to worse? Except the famous spread of timeliness, convenience, I think there may be one reason why the network media with real data, such as the hits of a watch? And these data that can not afforded by the paper media. Now, I’d like to introduce you three kinds of watches with good reputations.
Comment: This fake Tissot watch is familiar for most people, classic Tissot T-Classic series, according to the data, this fake Tissot watch is the most popular watches among all the same valued watches, creating with the stainless steel, which is available for business and leisure.
Black Dial Longines Sport L3.6126.96.36.199 Replica Watches Movement: self-winding Case: stainless steel Bracelet: stainless steel Diameter: 41MM
Comments: This fake replica Longines watch with the stainless steel case and bracelet, solid and durable, for the bezel that using the ceramic design, and inside of this white scale fake Longines Sport watch that is Cal. L633 self-winding movement, providing more than 38 hours power reserve.
Comments: Vintage Roman scale matches the special pointers, also with the white basic dial design, making this white dial replica Mido watch send out an elegant temperament; For the case, that adopted the stainless steel material, adding the polishing technology, more harmonious when matching with the white dial; Brown leather strap matches with the butterfly clasp, more elegant.
It’s that time of year again – Handwerkskunst time. As the end of the calendar inches closer and closer, Lange always gives us a mega watch that focuses on showing off the ornate handwork and often-overlooked crafts that the German manufacture is keeping alive. The elegant A. Lange & Söhne 1815 copy watches are always made in small quantities, involves a mix of complications and aesthetic flourishes, and, predictably, carries a price tag to match. This year’s introduction is no exception.
In the last few years, we’ve seen the Zeitwerk, the 1815 Tourbillon, and the Lange 1 Tourbillon all get Handwerkskunst treatments. There’s been heavy use of the special tremblage engraving technique which gives that unique grained texture to the surfaces of plates, bridges, and dial, amongst other special engraving and enameling techniques. This year’s watch continues that, but with a slightly more maximalist aesthetic.
The noble A. Lange & Söhne 1815 replica watches are one serious watch, both mechanically and artistically. When I first saw it, I let out an audible “woah.” But let’s start with the basics. The 1815 Rattrapante Perpetual Calendar Handwerkskunst is 41.9mm in diameter and 15.8mm high, with a case in solid white gold. It’s a pretty substantial watch, but I’ve got to say that after seeing it in the metal I think it’s definitely still wearable for those who don’t mind larger watches.
There’s a ton of functionality packed into this pieces, as you can probably guess from the name. Looking at the dial, you’ve got hour and minute hands, plus a sub-dial at six o’clock that shows the running seconds and the moonphase.
Then, there’s the split-seconds chronograph functions. The white and yellow gold central seconds hands (the latter is the split hand) are joined by a 30-minute totalizer at 12 o’clock that also contains the power reserve indicator. Finally, there’s a full perpetual calendar, with the day of the week and date at nine o’clock and the month and leap year cycle indicator at three o’clock.
There’s not just a lot of information on the dials of A. Lange & Söhne fake watches with gold hands though – there’s a lot of decoration too. The entire thing starts with a large plate of white gold. Then a series of stars are relief engraved around the areas where the numerals and sub-dials are positions. Iridescent blue enamel is then applied over the top, so the stars seem to be floating in a dark blue sky.
The silvered, circular grained sub-dials really pop against the blue, and the Arabic numerals are flush with the surface of the enamel. In all, the dial itself is comprised of five components, and this is the first time A. Lange & Söhne has combined engraving and enameling techniques to produce a single dial.
There are only two kinds of timekeepers, fundamentally. One relies on continuous processes that proceed at a fixed rate, such as water clocks and hourglasses (the rotation of the Earth on its axis is another example). The second relies on harmonic oscillators —– among these are pendulums, balances with balance springs, tuning fork timekeepers like the Accutron, and quartz crystals.
In the latter instance, an oscillator is kept in motion by a driving force, which is balanced by a restoring force to produce a natural frequency. You’ve probably heard bits and pieces about the new oscillator for the reliable Zenith replica watches over the last few months, and it’s a fascinating development. It’s something very new, and, at the same time, it’s based on the same immutable physical laws as any other harmonic oscillator.
The excellent Zenith fake watches into which this new technology has been placed is called the Zenith Defy Lab and Zenith describes it with pardonable hyperbole —– “the only mechanical watch embodying both an evolution and an improvement of the sprung balance principle presented in January 1675.”
That’s the approximate date on which the Dutch mathematician, physicist, and horologist Christiaan Huygens published his findings on the use of a spiral spring and balance wheel combination, in the Journal des Sçavans (the earliest known academic journal in Europe, which began publication in 1665).
The invention of the balance spring was not Huygens’s alone —– the Englishman Robert Hooke came up with the idea at about the same time —– but Huygens today is generally credited with having been the first to create a working mechanism.
The watch with balance spring wasn’t the first precision mechanical timepiece; that honor goes to the pendulum clock, which Huygens also is credited with inventing (the first pendulum clock to his design was completed in 1657). However, it was the balance and spring combination that made Zenith copy watches with mechanical movements more precise.
A harmonic oscillator is one in which, when the oscillator is pushed from its neutral position (hanging straight down, in the case of a pendulum) it’s returned to its neutral position by some restoring force which —– and this is the critical part —– is always proportional to the disturbing force. Put simply, the harder you push a harmonic oscillator the harder it swings back; anyone who’s ever pushed someone on a swing knows the feeling. It’s the proportionality of the restoring force to the perturbing force that gives a harmonic oscillator its “natural frequency.”
The first IWC Ingenieur went on sale some time during the mid-fifties and was designed to be a watch for scientists and technicians. However, the Ingenieur has undergone significant changes in recent years, not just in its design, but also in its purpose. The Ingenieur today is more of sports watch that is targeted at petrolheads and racing enthusiasts, but this trio adopts the more classic case design of pre-Genta models.
To further cement the Ingenieur’s positioning as the petrolhead’s watch of choice, IWC released three new IWC Ingenieur fake watches last year to commemorate the 74th anniversary of the annual Goodwood Member’s Meeting, a weekend-long vintage racing event.
When these three watches were unveiled last year, they also heralded a new look for IWC’s Ingenieur. Gone are the integrated lugs, crown protectors, and angular lines inspired by the earlier Ingenieur watches designed by the legendary Gerald Genta. Instead, the new Ingenieur Chronograph features a more classically-styled and restrained case design that has more in common with the very first Ingenieur watches from the ’50s.
In the past, the Ingenieur was notable for its self-winding movement, which featured the Pellaton winding system as well as its soft iron cage, which could withstand magnetic fields of up to 80,000 A/m. Said to be designed especially for scientists, researchers, and technicians who had to work in highly magnetic environments, it was to IWC what the Milgauss was to Rolex.
Back to these watches. Case diameter is a relatively modest 42mm, which isn’t too large as far as modern watches go. Most sport chronographs tend to be around 44mm and above these days, so the slightly smaller size of IWC Ingenieur copy watches with mechanical movements is bound to delight readers who love more moderately sized watches.
Unfortunately, at slightly over 15mm, the case is still quite thick, a malady that afflicts many modern sport chronographs. On the bright side, this, along with the chunky crown and chronograph pushers, ensures that these special edition Ingenieur Chronograph watches have considerable wrist presence.
On the inside, these decent IWC Ingenieur replica watches will be powered by IWC’s in-house Caliber 69370. This movement was specifically developed to replace the Valjoux 7750 used in entry-level IWC chronograph watches. As a result, the Caliber 69370 shares the same dimensions as the Valjoux 7750, but with two notable improvements. It features a column wheel instead of a basic cam, and has a more efficient winding system.
Power reserve is 46 hours and the dial configuration is similar to the Valjoux 7750, with sub-dials at 12, 9, and 6 o’clock as well. The key difference, however, is that the running seconds of the Caliber 69370 is at 6 o’clock rather than 9 o’clock. The movement is nicely finished and can be admired through a sapphire display case back.
Any watch brand would love to claim a truly “iconic” chronograph in their lineup, but TAG Heuer arguably has a couple, among which is the famous square-cased Monaco. When (pre-TAG) Heuer launched the Monaco back in 1969, it was the first Swiss-made automatic chronograph that was square and water-resistant. Now, they have revealed the delicate TAG Heuer Monaco replica watches that specifically recall Steve McQueen’s role in making the Monaco famous.
The Heuer Monaco found fame after Steve McQueen sported it on his wrist during his appearance in the 1971 film, Le Mans. In that same movie, McQueen’s character is sponsored by Gulf Oil, and you’ll see that his white livery also sported the blue and orange stripes, as in the famous picture above. So TAG Heuer Monaco fake watches with mechanical movements are inspired not only by the original Heuer Monaco, but also by Steve McQueen and his character in Le Mans. TAG Heuer says it is also a tribute to the 50th anniversary of the Gulf racing stripes and its role in motor racing.
At its essence, TAG Heuer copy watches with red hands has remained true to the original. For example, the crown is still on the left of the watch case, there is a highly domed sapphire crystal, and the dial is blue with a sunray-brushed finish.
It is powered by the TAG Heuer Calibre 11 which is very similar to the movement found in the original Monaco with the benefit of modern production methods and tolerances. The Calibre 11 provides 40 hours of power reserve and beats at 4Hz. It is a time-tested and reliable movement and, much like the Calibre 1861 is to the Speedmaster, it is indelibly linked to the Heuer Monaco.
The steel case is 39mm in diameter but being square in shape means it wears much larger than you might think. The bezel and case both have alternating brushed and polished finishing to give the case some visual interest. Unlike the original Monaco, the pushers in the Gulf Special are square, which I think fits the aesthetic of the watch much better. As mentioned earlier, the watch has a highly domed and beveled sapphire crystal.
This was one of the hallmarks of the original Monaco from 1969 and one of the features that helped it to be water-resistant. Speaking of water-resistance, the reliable TAG Heuer Monaco fake watches are rated to 100m, even with its display caseback (which TAG Heuer has not provided an image of at the moment).
This article comes to us from the “Speedy Tuesday” archives, and focuses on my opportunity to review, compare and contrast the modern Omega Speedmaster replica watches with its vintage predecessor from 1969.
After the Omega Speedmaster Professional won the race to the Moon in 1969, Omega thought it was time to come up with a watch that was perhaps a bit more up-to-date and ready for the 1970s — design-wise, that is, as the watch would still need to handle the same abuse as the Speedmaster Professional “Moonwatch” could. Sometime in 1969, Omega introduced the first Speedmaster Mark II, which was actually a Speedmaster Professional Mark II. (For non-native-English-speaking readers: the “Mark” in the name stands for a new or revised/improved version; it is similar to calling something a “2.0 version” these days.)
The Speedmaster Mark II came with the same Lemania-based movement as the Moonwatch, Reference 145.022. This movement is Omega’s Caliber 861 and was in production from 1968 through about 1996, when it was succeeded by the Caliber 1861 movement. Omega Speedmaster copy watches with Swiss mechanical movements had a barrel-shaped case that looked totally different from the asymmetrical Speedmaster Professional case. The regular Speedmaster, which was issued to NASA astronauts, was still in production, however. Throughout all the Speedmaster Mark series, the regular Speedmaster Pro remained available (and, of course, remains so today).
When Omega ceased production of the Speedmaster Mark II in 1972, the Mark III already had been introduced. The Speedmaster Mark III was succeeded by the Mark IV in 1973. Then there is the Mark 4.5 (which is a Mark IV with a different movement, an Omega Caliber 1045), which came on the market in 1974. The last one of the Speedmaster Mark series is the Mark V, introduced around 1984. Confusing, right?
There are even more models in between and some slight variations on the above. In any case, Omega decided to do a Speedmaster Mark II reissue in 2014, and we noticed that the watches were already in the Omega boutiques before their official introduction at Baselworld 2014. Just like the original Omega Speedmaster replica watches, there are a few variations available of the Omega Speedmaster Mark II Co-Axial 2014 models. There is a black-dial version and a racing-dial version as well as a Speedmaster Mark II “Rio 2016” Olympic Games edition (pictured below) that we saw during our appointment with Omega.
Among the most storied watches, the Omega Speedmaster holds a special position as the watch that’s been to the Moon and back – and a bunch of other places, as we shall soon see. While there is plenty of printed and online literature available to study for those who want to know all about the “Moonwatch,” it is exceedingly rare to be given a chance to go hands-on with some of the actual watches that have been through the historical events which have helped to create the remarkable popularity the Speedmaster enjoys today.
A few days ago, at Omega’s London event celebrating the notable 60th anniversary of the Speedmaster, we went hands-on with not one or two, but six incredible steel case Omega Speedmaster replica watches that have truly been “out there.” Here’s every one of them telling their story.
First Generation Omega Speedmaster CK 2915 (1957)
It all started rather inconspicuously in 1957, the year Omega introduced its “Professional” line of watches that included the first Speedmaster, the Seamaster 300, and the Railmaster. To see the trio together, check out our hands-on with the Omega 60th anniversary series here.
Omega says – and it makes sense – that they originally had not conceived the Speedmaster for extra-terrestrial use. Although it was in the very same year that the Russians successfully launched the first-ever satellite into space on October 4, 1957, it was not until much later, in 1965, that the first spacewalk happened – once again, achieved by the Russians, as Alexei Leonov spent 12 minutes and 9 seconds in the big vast unknown nothingness (cool story on that from Gizmodo here).
In the meantime, the Speedmaster had been set on its own course, as Omega heavily marketed it to car enthusiasts, motorists, and racing drivers. How? Well, did you know that the black dial Omega Speedmaster CK2915 fake watches, the first Speedmaster of them all (add Lord of the Rings narrator voice to that bit for added drama), was the first-ever watch to place its tachymeter bezel outside the dial and crystal? An almost laughably negligible “achievement” compared to what the Speedmaster would soon have to gloat about.
Still, the importance of the CK2915 is undeniable, as it was a strong enough beginning – thanks to its almost uncannily well-balanced, sporty, yet elegant looks and a heavy-duty 321 hand-wound chronograph caliber – to merit future updates to it. With its now-famed and highly legible “Broad Arrow” hands, plus excellent overall proportions and wearability, the Speedmaster collection was certainly off to a strong beginning.
The First Omega In Space: 2nd Generation Omega Speedmaster CK 2998 (1959)
1959 saw the introduction of a revised, second generation version, the Omega Speedmaster CK 2998. It retained the symmetrical case and the hand-wound Caliber 321 from Lemania, but introduced a new “Alpha” design handset that replaced the “Broad Arrow” ones seen on the first model. The tachymeter bezel was also standardized in the famous black aluminum version still in use today.
More importantly, the CK 2998 was also the first Omega in space, as Omega explains: “The CK 2998 was the very model purchased by Mercury astronauts Walter “Wally” M. Schirra and Leroy G. “Gordo” Cooper in 1962 as their private watch. It was worn by Schirra during his Mercury-Atlas 8 (Sigma 7) mission, becoming the first Omega Speedmaster worn in space in October 1962, a full two years before NASA’s now-famous tests that led to the official selection of the Speedmaster for use in all of NASA’s manned missions.” It is here where we should note – since I presume some of you are asking yourselves the question – that the first watch ever worn in space was the one on the wrist of Yuri Gagarin who ventured into the unknown on April 12, 1961, after taking off from the Baikonur Cosmodrome in modern-day Kazakhstan. There is no official information on this, but he had most likely been wearing a Sturmanskie, a Soviet watch “brand” not sold to the public but reserved for soldiers at the time.
“First Omega In Space”, a modern, very elegant tribute in Sedna gold from 2015.
Today, the CK 2998 is one of the most collectible Speedmasters out there. Produced between 1959 and 1962, there aren’t many original ones around today in collectible condition with original parts, which sends resale value north of the $20k mark. Just look at the one Omega had on display: it had a lot of wear and tear – which arguably is part of the charm and patina of a vintage watch, if that’s your thing… And if it isn’t, you’ll have to hunt down a discontinued/sold-out steel or gold “FOIS” First Omega In Space produced more recently.
Qualified By Nasa: 3rd Generation Omega Speedmaster ST 105.003 (1963-1964)
The next development within the Speedmaster family, in Omega’s words, “was a decisive one.” Introduced in 1963 and still powered by the manual-wound Caliber 321, the 3rd generation Omega Speedmaster ST 105.003 is the exact model delivered to and tested by NASA. Responding to a request for “wrist chronographs” in October 1964, Omega’s North American agent supplied NASA with the required number of ST 105.003 Speedmasters, without knowing exactly what they would be used for – and, better still, without even informing Omega headquarters in Biel, Switzerland.
These watches, as well as models from other competing brands (Omega doesn’t specify, but they were from Rolex, Longines, and later from Bulova, even), were evaluated almost to destruction in a series of tests that can justly be described as the toughest trials a watch had ever endured.
To give you an idea, it included: high and low temperature tests (two full days at 70 °C (158 °F), 30 minutes at 93 °C (199 °F), then 4 hours at -18 °C (-0.4 °F); ten 24-hour cycles at >95% humidity with temperatures ranging from 25 to 70 °C; corrosion tests; six 40 G shock tests in six directions, low and high pressure tests, vibration tests and even a sound test where the watches were “shouted at” at a deafening 130 decibels at frequencies from as low as 40 up to 10,000 Hertz for 30 minutes. Key signs of deterioration included the lume falling apart on the hands, as well as, you guessed it, the rate being affected… and yet, the watches had at last been officially certified by NASA.
Edward White and the Omega Speedmaster ST 105.003 on America’s first EVA on June 3rd 1965, during the Gemini 4 mission.
As the Omega Speedmaster became “officially certified” equipment for NASA’s manned space program, NASA procured further examples of the ST 105.003 and officially equipped its astronauts with it. This model reached further fame when it was worn for the first time outside the space capsule: on the wrist of astronaut Edward White, this model became part of America’s first EVA (extra-vehicular activity, or, more plainly, “spacewalk”) on June 3, 1965, during the Gemini 4 mission. First Moonwatch: 4th Generation Omega Speedmaster ST 105.012 & ST 145.012 (1964-1965)
While Omega had no knowledge of what was going on over in Houston since NASA’s selection process was carried out without involving the respective companies’ headquarters, Omega was nevertheless evolving the Speedmaster. In order to offer additional protection to the chronograph’s pushers and its crown, the Speedmaster case was slightly modified: its right side was slightly enlarged, thus offering more protection and, as an unavoidable side-effect, a newfound, asymmetrical look.
It was introduced to some select markets in 1964 with the model ST 105.012 that now also featured “Professional” on the dial, as it was at this point a prominent part of Omega’s professional line of charming copy watches that, as we mentioned above, they launched in 1957. Still powered by the same trusty movement, the Caliber 321, the model further evolved in 1967 into the reference ST 145.012, with the addition of a slightly improved method of attaching the pushers to the case. This model proved to be the last one to use the Caliber 321, the very movement that guaranteed perfect timing during all six lunar landings up to and including the last mission to land on the moon: Apollo 17.
Even in the exceedingly turbulent times that the watch industry has been enduring for nearly two years, it is rare news to see major brands exchange hands – and that is why today is a notable day, as it has just been announced that Breitling has been sold to CVC Capital Partners for more than 800 million euros – that is about 873 million US dollars or 866 million Swiss francs.
Until this moment, Breitling had been one of only a handful of properly independent major brands out there – Chopard and Patek Philippe remain two other family-owned big players in the industry, with every other mammoth brand either owned by one of the big four groups (Swatch Group, LVMH, Richemont, and Kering) or some other major entity, like Rolex and Tudor with the Hans Wilsdorf Foundation. The last big news of this nature was when family-owned Frederique Constant, Alpina, and Atelier de Monaco were purchased by Citizen Watch Co. last year.
Nevertheless, previous majority owner Theodore Schneider will remain with Breitling because, as part of the CVC Capital Partners deal, he agreed to re-invest for a 20% stake in Breitling. Ironically, it was as recently as May last year that Breitling vice-president Jean-Paul Girardin told Reuters he was confident in Breitling retaining its independence despite speculation about its future following the 2015 passing of Ernest Schneider who bought the brand in 1979.
Still, soon after that interview, Bloomberg (the breaker of today’s news) had reported in late November last year that Breitling was “on the block” for sale, after having been in the hands of the Schneider family since 1979. Breitling has very much been a family-run company in the sense that Ernest Schneider had been running it from the late ’70s until the early ’90s when his son, Théodore Schneider took over. While Théodore is the (exceedingly rarer) type of the quiet watch CEO who stays out of the limelight, he’s said to be very much taking part in running the business.
Late last year, when the speculation regarding Breitling’s sale sprung, analysts expected the manufacture that employs some 900 people and produces around 150,000 watches annually to fetch between 600 and 900 million Swiss francs (CHF). As of today, we know that Breitling has been acquired for over CHF866 million – with Breitling’s annual sales of about CHF420 million, this might give the company the financial stability it needed to make it through these troubling times and, hopefully, come out stronger once it’s over.
As for CVC’s official plans with Breitling, Daniel Pindur, Senior Managing Director at CVC says: “Using our network and expertise, CVC will work to make this global, iconic brand even more renowned and help shape the future of one of Switzerland’s last independent watch manufacturers. Specifically, we see significant growth potential for Breitling in both existing and new geographies by driving the digitization of the marketing and distribution channels in the company, helping to enrich the product and customer experience.”
Breitling, who produces some of the quality movements, dials, cases, and bracelets for its watches has tremendous potential and, on a personal note, I am a bit worried to see them become part of a large financial group. Times do change from better to worse and back in the watch industry, there’s nothing new about that, but I do hope that Breitling will stay away from cheapening its brand and its products in chasing higher temporary profits. If you’ve handled a Chronomat or Navitimer lately, you’ll know that Breitling has a long way down the quality food chain, as its movements, cases, bracelets, and dials remain some of the truly solidly built ones at a time when we already see a lot of high-end brands go for cheaper designs and quality of execution.
Challenges ahead of Breitling include fixing the strong discounting and vast grey market as well as gaining more traction in established and new markets through streamlined and more powerful branding and marketing. They produce a huge variety of timepieces from the $2,000 Colt Skyracer with a COSC-certified quartz movement and carbon composite case (hands-on here) through the Bluetooth-connected black rubber straps Bentley Supersports B55 copy watches (explained here) and true Breitling classics like the Navitimer 01 (reviewed here), to the bonkers-expensive, $40,000 Superocean Heritage Chronoworks (hands-on here). All this is to say that Breitling stands on a solid foundation of versatile collections, but their awareness and global presence has to be improved – something both parties expect “the network and expertise of CVC” to assist with.
More recent news from Arabic numerials Breitling copy watches included their producing of chronograph movements for the Tudor Heritage Black Bay Chrono (hands-on here) and them sourcing a base three-hand movement from Tudor in return. This, though not confirmed, implied unused manufacturing capacities at Breitling and a break from industry-wide principle in that they chose not to invest in developing their own base manufacture caliber but rather source one with similar credentials.
The transaction between Breitling and CVC Capital Partners is expected to complete by around June 2017, subject to approval by competition authorities. How long and in what role Théodore Schneider will stay around at Breitling, we are yet to learn. The charming replica watches are worthy to try.
The Patek Philippe 5711 Nautilus in steel is one of the hottest luxury sports watches around. It is hard to get and typically goes for over retail price unless you want to spend several years (depending on where you are in the world) on a waiting list. Part of this is because Patek Philippe claims that only about 20% of their total watch production overall is in steel, and among the steel models the 5711 Nautilus is just one of those which Patek Philippe produces. It also happens to dole them out in small, balanced amounts to keep the market from being saturated. The watch pictured here, however, is not a steel Nautilus but rather the all-platinum reference 5711/1P that was produced as a limited edition at the end of 2016 for the 40th anniversary of the Nautilus watch collection overall.
While the steel Nautilus has a retail price around $25,000, this 5711/1P costs more than four times that price. In addition to it being a limited edition (which of course ups the desirability level a bit), the case and bracelet are in full 950 platinum, and the watch also features diamonds. Using baguette-cut diamonds as the hour markers is a technique I think is both classy and masculine for when you clearly want to convey wealth, but also remain a bit more under-the-radar. As I said, if you saw this watch on someone’s wrist at a glance, given the look of the metal and the blue dial, it would easily be confused for the normal steel model.
I want to address something very important that marred the launch of the limited-edition 5711/1P steel case Patek Philippe Nautilus replica wacthes. Images that Patek Philippe shared of the watch made it look as though the “40 1976-2016” text on the dial was large and obtrusive. In fact, it looks downright ugly in those images. In reality, however, this text is very subtle and much more difficult to see in most lighting conditions.
For the most part, while wearing the Patek Philippe Nautilus Platinum 40th Anniversary watch, you can’t really see the 40th-anniversary text. This was really important to mention since I think a lot of people felt that this was a really big design mistake – as it appeared in Patek Philippe’s own marketing images. The lesson – once again – is that we should always hold final reservations about a watch until after we get to see it in person. (The watch hands cover some of the text in our images – apologies for this, but you get the idea.)
The Patek Philippe Nautilus 5711/1P is also larger than most Nautilus watches at 44.05mm wide. It doesn’t wear too large given that a good amount of that size is thanks to large side flanks – which are a hallmark of the original Gerald Genta design. The tapering platinum bracelet is both thin against the wrist and very comfortable. With this size and overall lovely aesthetic, this is probably my favorite Nautilus that I’ve ever worn – but of course, you need to stomach the price of platinum. Water resistance remains unchanged from other Nautilus models at 120 meters.
The addition of baguette diamonds as hour markers seems appropriate for this type of watch. Purists will claim that they needlessly add bling and take away from the mostly simple dial that Genta intended for the Patek Philippe Nautilus. Perhaps that is true on the steel models, but for this limited edition $100,000-plus platinum model, you might as well add diamond hour markers into the mix. It just makes the wearer feel better overall with the emotional delivery the watch appears to be aiming for. One more diamond is placed on the lower part of the case side under 6 o’clock facing the user.
Inside the blue dial 5711 Patek Philippe Nautilus copy watches is the attractive, in-house-made caliber 324 S C automatic movement. With a lot of Patek’s in-house technology, it’s a very capable and reliable daily wear. The movement is comprised of 213 parts, operating at 4Hz (28,800bph) with Patek’s Spiromax balance wheel and about 40 hours of power reserve. It also happens to be a rather svelte movement at just 3.3mm thick. Functions include the time with seconds and, of course, the date.
With its larger size, limited-edition exclusivity, and very straightforward sense of precious-material luxury, the Patek Philippe Nautilus 5711/1P is a winner in my book – though it is clearly not designed for the masses. You can see that an owner of the watch (who so nicely let me once again take a Patek Philippe off his wrist to ogle at – a regular ritual of ours) has been wearing and enjoying this platinum Nautilus, wear and tear included. That is a good thing, because I really dislike the idea of people buying watches and just storing them away, which is particularly common with rare Patek Philippe models. These are items meant to be worn and appreciated on the wrist.
Patek Philippe built 700 pieces of the limited-edition platinum fake watches 40th Anniversary Nautilus 5711/1P. At the same time, they also released a limited-edition Nautilus Chronograph 5976/1G, but in my opinion, the real winner is the (more expensive) 5711/1P.